Barriera ferroviaria H0, completamente automatica. Alimentato da 2 azionamenti sottoscocca separati. Passaggio a livello motorizzato, barriere con movimento lento, alimentazione 15 V CA.
Taverna con birreria all'aperto - misure 18,9 x 17,2 x 18,5 cm hoch
Il modello è stato ispirato dal Wirtshaus am See di Bregenz sul Lago di Costanza. Oltre alla bella architettura, il romantico graticcio in particolare determina l'aspetto e rende l'edificio un vero colpo d'occhio.
Il kit Laser-Cut viene fornito con dettagliate istruzioni di montaggio e l'apposito adesivo speciale Laser-Cut.
Tavern with beer garden - measures 18.9 x 17.2 x 18.5 cm hoch
The model was inspired by the Wirtshaus am See in Bregenz on Lake Constance. In addition to the beautiful architecture, the romantic half-timbering in particular determines the appearance and makes the building an absolute eye-catcher.
The Laser-Cut kit comes with detailed assembly instructions and the spe
Set completo pensilina per stazione epoca III-IV (già costruita - adatta per binario Marklin C) - adatto alla scala HO 1:87
Misure complessive : 60 x 3,8 cm, altezza 1,5 cm
Sistema di pensiline per MÄRKLIN® C-Gleis® realizzato con struttura in schiuma rigida
Complete set shelter for station era III-IV (already built - suitable for Marklin C track) - suitable for HO scale 1:87
Overall measurements: 60 x 3.8 cm, height 1.5 cm
Canopy system for MÄRKLIN® C-Gleis® made with rigid foam structure
Komplettset Unterstand für Bahnhof Epoche III-IV (bereits gebaut - passend für Märklin C-Gleis) - passend für Spur HO 1:87
Gesamtmaße: 60 x 3,8 cm, Höhe 1,5 cm
Überdachungssystem für MÄRKLIN® C-Gleis® aus Hartschaumstruktur
Estremità curve pensilina per stazione pz. 2 epoca III-IV (già costruita - adatta per binario Marklin C) - adatto in scala HO 1:87
Misure: 1 lato destro e 1 lato sinistro ciascuno lungo 12 cm, largo 3,8 cm, affusolato a 2 cm, alto 1,5 cm, cadendo a 0,5 cm
Sistema di pensiline per MÄRKLIN® C-Gleis® realizzato con struttura in schiuma rigida
Curved ends for station shelter pcs. 2 epoch III-IV (already built - suitable for Marklin C track) - suitable in HO scale 1:87
Measurements: 1 right side and 1 left side each 12cm long, 3.8cm wide, tapered to 2cm, 1.5cm high, dropping to 0.5cm
Canopy system for MÄRKLIN® C-Gleis® made with rigid foam structure
Gebogene Enden für Stationsunterstände Stk. 2 Epoche III-IV (fertig gebaut - passend für Märklin
Estremità dritte pensilina per stazione pz. 2 epoca III-IV (già costruita - adatta per binario Marklin C) - adatto in scala HO 1:87
Misure: 12 x 3,8 x 1.5 - 0.5 altezza
Sistema di pensiline per MÄRKLIN® C-Gleis® realizzato con struttura in schiuma rigida
Straight ends canopy for station pcs. 2 epoch III-IV (already built - suitable for Marklin C track) - suitable in HO scale 1:87
Measurements: 12 x 3.8 x 1.5 - 0.5 height
Canopy system for MÄRKLIN® C-Gleis® made with rigid foam structure
Baldachin mit geraden Enden für Station Stck. 2 Epoche III-IV (fertig gebaut - passend für Märklin C-Gleis) - passend im Maßstab HO 1:87
Maße: 12 x 3,8 x 1,5 - 0,5 Höhe
Überdachungssystem für MÄRKLIN® C-Gleis® aus Hartschaumstruktur
Pensilina per stazione con uscita binario epoca III-IV (già costruita - adatta per binario Marklin C) - adatto alla scala HO 1:87
Misure: 18 x 3,8 cm x 1-1,5 cm altezza.
Sistema di pensiline per MÄRKLIN® C-Gleis® realizzato con struttura in schiuma rigida
Station shelter with platform exit from III-IV period (already built - suitable for Marklin C platform) - suitable for HO 1:87 scale
Measurements: 18 x 3.8cm x 1-1.5cm high.
Canopy system for MÄRKLIN® C-Gleis® made with rigid foam structure
Bahnhofsunterstand mit Bahnsteigausstieg aus III-IV-Zeit (bereits gebaut - passend für Märklin C-Bahnsteig) - passend für HO Maßstab 1:87
Maße: 18 x 3,8 cm x 1-1,5 cm hoch.
Überdachungssystem für MÄRKLIN® C-Gleis® aus Hartschaumstruktur
Novità 2020 - uscita prevista maggio 2020
Misure: 18 x 3,8 cm x 1,5 cm altezza.
Sistema di pensiline per MÄRKLIN® C-Gleis® realizzato con struttura in schiuma rigida
Serie Laser Cut:Viadotto Brombenz della ferrovia dell'Albula
Misure:
18,6 x 3,8 centimetri,
8,6 cm di altezza
(adatto alla scala N 1:160, in materiale laser cut, in kit da costruire, colla adatta al montaggio Faller art 170494)
Serie Laser-Cut: Ponte ad arco in pietra
misure: 18,5 x 4 cm, 6 cm altezza
(adatto alla scala N 1:160, in materiale laser cut, in kit da costruire, colla adatta al montaggio Faller art 170494)
Ponte del villaggio di Oberdorf (già costruito)
Misure:
- Altezza complessiva: 7,8 cm
- Larghezza totale: 5,8 cm
- Lunghezza totale: 15,7 cm
- Altezza arco: 4,6 cm
- Larghezza arco: 7,1 cm
- Larghezza cavalcavia: 3,8 cm
Oberdorf village bridge (already built)
Measures:
- Overall height: 7.8 cm
- Total width: 5.8 cm
- Total length: 15.7 cm
- Arch height: 4.6 cm
- Arch width: 7.1 cm
- Overpass width: 3.8 cm
Dorfbrücke Oberdorf (bereits gebaut)
Mittel:
- Gesamthöhe: 7,8 cm
- Gesamtbreite: 5,8 cm
- Gesamtlänge: 15,7 cm
- Bogenhöhe: 4,6 cm
- Bogenbreite: 7,1 cm
- Überführungsbreite: 3,8 cm
Ponte Waldtobel pedonale in muratura (già costruito)
Misure:
- Altezza complessiva (media): 4,5 cm
- Larghezza totale: 4,0 cm
- Lunghezza totale: 14,7 cm
- Altezza arco: 2,3 cm
- Larghezza arco: 7,2 cm
- Larghezza panoramica: 2,2 cm
Waldtobel brick pedestrian bridge (already built) - suitable for HO 1:87 scale
Measures:
- Overall height (average): 4.5 cm
- Total width: 4.0 cm
- Total length: 14.7 cm
- Arch height: 2.3 cm
- Arch width: 7.2 cm
- Panoramic width: 2.2 cm
Waldtobel Fußgängerbrücke aus Backstein (bereits gebaut) - passend für HO Maßstab 1:87
Mittel:
- Gesamthöhe (Durchschnitt): 4,5 cm
- Gesamtbreite: 4,0 cm
- Gesamtlänge: 14,7 cm
- Bogenhöhe
Ponte Argen in pietra con due archi (già costruito)- adatto alla scala HO 1:87
Misure:
- Altezza totale (centro): 6,6 cm
- Larghezza totale: 3,8 cm
- Lunghezza totale: 21,5 cm
- Altezza arco: 3,4 cm
- Larghezza degli archi: 7,2 cm
- Larghezza durante la corsa: 2,2 cm
Argen stone bridge with two arches (already built) - suitable for HO 1:87 scale
Measures:
- Total height (center): 6.6 cm
- Total width: 3.8 cm
- Total length: 21.5 cm
- Arch height: 3.4 cm
- Width of the arches: 7.2 cm
- Width during the run: 2.2 cm
Argen-Steinbrücke mit zwei Bögen (bereits gebaut) - passend für den Maßstab HO 1:87
Mittel:
- Gesamthöhe (Mitte): 6,6 cm
- Gesamtbreite: 3,8 cm
-
Ponte metallico in curva R 360 mm - misure 180 x 65 mm, da costruire - (adatto alla scala HO 1:87, in materiale plastico, in kit da costruire, colla adatta al montaggio Faller art 170490 o 170492)
Curved metal bridge R 360 mm - measures 180 x 65 mm, to build - Suitable for HO 1:87 scale
Gebogene Metallbrücke R 360 mm - Maße 180 x 65 mm, zum Bauen - Passend für HO im Maßstab 1:87
Ponte metallico diritto binario singolo (misure 180 x 65 mm), da costruire - (adatto alla scala HO 1:87, in materiale plastico, in kit da costruire, colla adatta al montaggio Faller art 170490 o 170492)
Single track straight metal bridge (measures 180 x 65 mm), to build - Suitable for HO 1:87 scale
Eingleisige gerade Metallbrücke (Maße 180 x 65 mm), zum Bauen - Passend für den Maßstab HO 1:87
Ponte metallico dritto corto a cassone a binario singolo (misure 180 x 650 x 450 mm), da costruire. (adatto alla scala HO 1:87, in materiale plastico, in kit da costruire, colla adatta al montaggio Faller art 170490 o 170492)
Straight short metal single-rail caisson bridge (measures 180 x 650 x 450 mm), to be built. Suitable for HO 1:87 scale
Gerade kurze eingleisige Senkkastenbrücke aus Metall (Maße 180 x 650 x 450 mm), zu bauen. Passend für HO Maßstab 1:87
Ponte metallico diritto a cassone ad un binario - misure 360 x 65 x 106 mm, da costruire.
(adatto alla scala HO 1:87, in materiale plastico, in kit da costruire, colla adatta al montaggio Faller art 170490 o 170492)
One-track straight metal box bridge - measures 360 x 65 x 106 mm, to be built. Suitable for HO 1:87 scale
Eingleisige gerade Metallkastenbrücke - Maße 360 ??x 65 x 106 mm, zu bauen. Passend für HO Maßstab 1:87
Ponte a traliccio a binario singolo lungo 36 cm (in kit) - (adatto alla scala HO 1:87, in materiale plastico, in kit da costruire, colla adatta al montaggio Faller art 170490 o 170492)
36cm long single rail truss bridge (kit) - suitable for HO scale 1:87
36cm lange eingleisige Fachwerkbrücke (Bausatz) - passend für HO Maßstab 1:87
Mobili ed elettrodomestici per interno abitazione
Contenuto: frigorifero, cucina a buffet, cucina a gas, cucina elettrica, piano cottura, lavatrice, armadio da cucina, tavolo da pranzo e 3 sedie.
Adatto per scala HO 1:87
Furniture and appliances for home interiors
Contents: fridge, buffet cooker, gas cooker, electric cooker, hob, washing machine, kitchen cabinet, dining table and 3 chairs.
Suitable for HO 1:87 scale
Möbel und Haushaltsgeräte für den Innenbereich
Inhalt: Kühlschrank, Buffetkocher, Gasherd, Elektroherd, Herd, Waschmaschine, Küchenschrank, Esstisch und 3 Stühle.
Passend für HO Maßstab 1:87