Scambio a doppio incrocio per funzionamento manuale a 15°, lunghezza 111 mm.
Adattabile per motore elettrico art 640000. Il binario 9136 funge da curva opposta e conduce alla distanza del binario parallelo di 33,6 mm.
Scala N 1:160, codice 80, con massicciata
Double cross switch for manual operation at 15°, length 111 mm.
Adaptable for electric motor art. 640000. Track 9136 acts as an opposite curve and leads to a parallel track distance of 33.6 mm.
N scale 1:160, code 80, with ballast
Doppelkreuzschalter für Handbetrieb bei 15°, Länge 111 mm.
Adaptierbar für Elektromotor Art. 640000. Gleis 9136 wirkt als Gegenbogen und führt zu einem parallelen Gleisabstand von 33,6 mm.
Spur N Maßstab 1:160, Code 80, mit Ballast
Scambio a doppio incrocio per funzionamento manuale a 15°, lunghezza 111 mm.
Adattabile per motore elettrico art 640000. Il binario 9136 funge da curva opposta e conduce alla distanza del binario parallelo di 33,6 mm.
Scala N 1:160, codice 80, con massicciata
Double cross switch for manual operation at 15°, length 111 mm.
Adaptable for electric motor art. 640000. Track 9136 acts as an opposite curve and leads to a parallel track distance of 33.6 mm.
N scale 1:160, code 80, with ballast
Doppelkreuzschalter für Handbetrieb bei 15°, Länge 111 mm.
Adaptierbar für Elektromotor Art. 640000. Gleis 9136 wirkt als Gegenbogen und führt zu einem parallelen Gleisabstand von 33,6 mm.
Spur N Maßstab 1:160, Code 80, mit Ballast
Scambio a 3 vie con anzionamento manuale, lunghezza 111 mm. I motori (art 6400000) dello scambio a tre vie possono essere commutati come punto "pensante". Le due uscite curve corrispondono al binario 9136 (15°). Scala N 1:160, codice 80
3-way switch with manual operation, length 111 mm. The motors (art 6400000) of the three-way turnout can be switched as a "thinking" point. The two curved exits correspond to track 9136 (15°).
N scale 1:160, code 80
3-Wege-Schalter mit Handbetätigung, Länge 111 mm. Die Motoren (Art. 6400000) der Dreiwegweiche können als "Denkstelle" geschaltet werden. Die beiden gebogenen Ausgänge entsprechen Gleis 9136 (15°).
Maßstab N 1:160, Code 80
1 pezzo in un blister
Codice 80
Carreggiata: 9 mm
Altezza del profilo del binario: 2,2 mm
Larghezza letto: 25 mm
Altezza letto: 5 mm
Altezza totale: 7,3 mm
Lunghezza: 212 - 252 mm
Distanza soglia: 5 mm
Incrocio curvo per funzionamento manuale con cuore centrale per trasmissione della corrente. Adattabile con motore punto elettrico.
Per passare dal raggio R1 al raggio R2 e viceversa, 45°. Scala N 1:160, codice 80, con massicciata
Curved crossing for manual operation with central core for current transmission. Adaptable with electric point motor.
To go from radius R1 to radius R2 and vice versa, 45°. N scale 1:160, code 80, with ballast
Bogenkreuzung für Handbetrieb mit Mittelkern zur Stromübertragung. Anpassungsfähig mit elektrischem Weichenantrieb.
Um von Radius R1 zu Radius R2 und umgekehrt zu gehen, 45°. Spur N Maßstab 1:160, Code 80, mit Ballast
Incrocio curvo per funzionamento manuale con cuore centrale per trasmissione della corrente. Adattabile con motore punto elettrico.
Per passare dal raggio R1 al raggio R2 e viceversa, 45°. Scala N 1:160, codice 80, con massicciata
Curved crossing for manual operation with central core for current transmission. Adaptable with electric point motor.
To go from radius R1 to radius R2 and vice versa, 45°. N scale 1:160, code 80, with ballast
Bogenkreuzung für Handbetrieb mit Mittelkern zur Stromübertragung. Anpassungsfähig mit elektrischem Weichenantrieb.
Um von Radius R1 zu Radius R2 und umgekehrt zu gehen, 45°. Spur N Maßstab 1:160, Code 80, mit Ballast
Codice 80 Insulfrog: Scambio in curva sinistro (lunghezza 156 mm) - senza massicciata.
Lunghezza interna: 138,5 mm Lunghezza esterna: 156 mm
Ogni scambio viene fornito con uno speciale breve rettilineo e una curva da utilizzare quando si forma un crossover curvo tra le curve del 2 ° e 3 ° raggio.
Chiodini adatti per fissaggio binari PECO SL-14
Code 80 Insulfrog: Left cornering switch (length 156 mm) - without ballast.
Inner length: 138.5mm Outer length: 156mm
Each turnout comes with a special short straight and bend for use when forming a curvy crossover between the 2nd and 3rd radius turns.
Nails suitable for fixing PECO SL-14 rails
Codice 80 Insulfrog: Scambio in curva destro (lunghezza 156 mm) - senza massicciata.
Lunghezza interna: 138,5 mm Lunghezza esterna: 156 mm
Ogni scambio viene fornito con uno speciale breve rettilineo e una curva da utilizzare quando si forma un crossover curvo tra le curve del 2 ° e 3 ° raggio.
Chiodini adatti per fissaggio binari PECO SL-14
Code 80 Insulfrog: Right cornering turnout (length 156 mm) - without ballast.
Inner length: 138.5mm Outer length: 156mm
Each turnout comes with a special short straight and bend for use when forming a curvy crossover between the 2nd and 3rd radius turns.
Nails suitable for fixing PECO SL-14 rails
Code 80 Insulfrog: Kurvenweiche rechts (Länge 156 mm) - ohne Ballast.
Innenlänge: 138,5 m
Scala HOe Codice 80: Binario curvo raggio R1 (raggio 228 mm) 22,5° (pz. 8)
Con traversine adatte a ferrovie industriali e da miniera.
per un cerchio servono 16 pezzi
HOe Scale Code 80: Curved track radius R1 (radius 228 mm) 22.5° (pcs. 8)
With sleepers suitable for industrial and mining railways.
for one circle you need 16 pieces
Spur HOe Code 80: Bogenradius R1 (Radius 228 mm) 22,5° (Stk. 8)
Mit industrie- und bergbautauglichen Schwellen.
Für einen Kreis benötigen Sie 16 Stück
Incrocio 15°, incrocio a destra, lunghezza 111 mm.
Le piste che si incrociano sono isolate l'una dall'altra in modo che due circuiti di alimentazione indipendenti possano incrociarsi.
Il binario 9136 funge da curva opposta e conduce alla distanza del binario parallelo di 33,6 mm.
Scala N 1:160, codice 80
Crossing 15°, crossing right, length 111 mm.
The crossing tracks are isolated from each other so that two independent power circuits can cross.
Track 9136 acts as an opposite curve and leads to the parallel track distance of 33.6 mm.
N scale 1:160, code 80
Kreuzung 15°, Kreuzung rechts, Länge 111 mm.
Die sich kreuzenden Gleise sind voneinander isoliert, so dass sich zwei unabhängige Stromkreise kreuzen können.
Gleis
Incrocio 15°, incrocio a sinistra, lunghezza 111 mm.
Le piste che si incrociano sono isolate l'una dall'altra in modo che due circuiti di alimentazione indipendenti possano incrociarsi.
Il binario 9136 funge da curva opposta e conduce alla distanza del binario parallelo di 33,6 mm.
Scala N 1:160, codice 80
Crossing 15°, crossing left, length 111 mm.
The crossing tracks are isolated from each other so that two independent power circuits can cross.
Track 9136 acts as an opposite curve and leads to the parallel track distance of 33.6 mm.
N scale 1:160, code 80
Kreuzung 15°, Kreuzung links, Länge 111 mm.
Die sich kreuzenden Gleise sind voneinander isoliert, so dass sich zwei unabhängige Stromkreise kreuzen können.
Gleis
Deviatoio in curva destro con azionamenti elettrico.
Raggio del binario principale 228,2 mm (R2), del binario di diramazione 194,6 mm (R1), angolo dell'arco 42°- senza massicciata - codice 80 - Scala N 1/160
Right curve turnout with electric drives.
Radius of main track 228.2 mm (R2), branch track 194.6 mm (R1), arc angle 42° - without ballast - code 80 - Scale N 1/160
Right curve turnout with electric drives.
Radius of main track 228.2 mm (R2), branch track 194.6 mm (R1), arc angle 42° - without ballast - code 80 - Scale N 1/160
Deviatoio in curva sinistro con azionamenti elettrico.
Raggio del binario principale 194,6 mm (R1), del binario di diramazione 228,2 mm (R2), angolo dell'arco 42°.
Con gli deviatoio in curva si può cambiare da un circuito con raggio R1 ad un circuito con raggio R2. - senza massicciata - codice 80 - Scala N 1/160
Left turnout with electric drives.
Radius of main rail 194.6 mm (R1), branch rail 228.2 mm (R2), arc angle 42°.
With the turnouts in the curve it is possible to change from a circuit with radius R1 to a circuit with radius R2. - without ballast - code 80 - Scale N 1/160
Linksweiche mit Elektroantrieb.
Radius Hauptschiene 194,6 mm (R1), Stichschiene 228,2 mm (R2), Bogenwinkel 42°.
Mit den Weichen im Bogen kann von einem
Larghezza cingoli: 9 mm
Altezza del profilo del binario: 2,2 mm
Larghezza lettiera: 25 mm
Altezza letto: 5 mm
Altezza totale: 7,3 mm
Distanza soglia: 5 mm
raggio 718 mm
Larghezza cingoli: 9 mm
Altezza del profilo del binario: 2,2 mm
Larghezza lettiera: 25 mm
Altezza letto: 5 mm
Altezza totale: 7,3 mm
raggio 718 mm
Distanza soglia: 5 mm
Scambio standard destro per azionamento manuale, con nasetto conduttore di corrente. Adattabile con motore elettrico art 640000.
Il binario 9136 funge da curva opposta e conduce alla distanza del binario parallelo di 33,6 mm. Scala N 1:160, codice 80, con massicciata
Standard right-hand turnout for manual operation, with current-conducting frog. Adaptable with electric motor art. 640000.
Track 9136 acts as an opposite curve and leads to the parallel track distance of 33.6 mm. N scale 1:160, code 80, with ballast
Einheitsweiche rechts für Handbetrieb, mit stromführendem Herzstück. Anpassungsfähig mit Elektromotor Art. 640000.
Gleis 9136 wirkt als Gegenbogen und führt zum parallelen Gleisabstand von 33,6 mm. Spur N Maßstab 1:160, Code 80, mit Balla
Scambio standard sinistro per azionamento manuale, con nasetto conduttore di corrente. Adattabile con motore elettrico art 640000.
Il binario 9136 funge da curva opposta e conduce alla distanza del binario parallelo di 33,6 mm. Scala N 1:160, codice 80, con massicciata
Left standard turnout for manual operation, with current-conducting frog. Adaptable with electric motor art. 640000.
Track 9136 acts as an opposite curve and leads to the parallel track distance of 33.6 mm. N scale 1:160, code 80, with ballast
Regelweiche links für Handbetrieb, mit stromführendem Herzstück. Anpassungsfähig mit Elektromotor Art. 640000.
Gleis 9136 wirkt als Gegenbogen und führt zum parallelen Gleisabstand von 33,6 mm. Spur N Maßstab 1:160, Code 80, mit Ballast
Scambio curvo destro per funzionamento manuale. Adattabile con motore articolo 640000.
Per passare dal raggio R1 al raggio R2 e viceversa, 45°. Scala N 1:160, codice 80, con massicciata
Right curved turnout for manual operation. Adaptable with motor article 640000.
To go from radius R1 to radius R2 and vice versa, 45°. N scale 1:160, code 80, with ballast
Bogenweiche rechts für Handbetrieb. Anpassbar mit Motor Artikel 640000.
Um von Radius R1 zu Radius R2 und umgekehrt zu gehen, 45°. Spur N Maßstab 1:160, Code 80, mit Ballast
Scambio curvo sinistro per funzionamento manuale. Adattabile con motore articolo 640000.
Per passare dal raggio R1 al raggio R2 e viceversa, 45°. Scala N 1:160, codice 80, con massicciata
Left hand turn for manual operation. Adaptable with motor article 640000.
To go from radius R1 to radius R2 and vice versa, 45°. N scale 1:160, code 80, with ballast
Linksdrehung für manuellen Betrieb. Anpassbar mit Motor Artikel 640000.
Um von Radius R1 zu Radius R2 und umgekehrt zu gehen, 45°. Spur N Maßstab 1:160, Code 80, mit Ballast
Deviatoio destro con azionamento elettrico.
Lunghezza 112,6 mm, angolo di deviata 15°, raggio di curvatura 362,6 mm (corrisponde R5). - senza massicciata - codice 80 - Scala N 1/160
Right turnout with electric drive.
Length 112.6 mm, deflection angle 15°, radius of curvature 362.6 mm (corresponds to R5). - without ballast - code 80 - Scale N 1/160
Rechte Weiche mit Elektroantrieb.
Länge 112,6 mm, Umlenkwinkel 15°, Krümmungsradius 362,6 mm (entspricht R5). - ohne Ballast - Code 80 - Maßstab N 1/160
Deviatoio sinistro con azionamento elettrico.
Lunghezza 112,6 mm, angolo di deviata 15°, raggio di curvatura 362,6 mm (corrisponde R5). - senza massicciata - codice 80 - Scala N 1/160
Left turnout with electric drive.
Length 112.6 mm, deflection angle 15°, radius of curvature 362.6 mm (corresponds to R5). - without ballast - code 80 - Scale N 1/160
Linke Weiche mit Elektroantrieb.
Länge 112,6 mm, Umlenkwinkel 15°, Krümmungsradius 362,6 mm (entspricht R5). - ohne Ballast - Code 80 - Maßstab N 1/160
Deviatoio destro con azionamento elettrico.
Lunghezza 104,2 mm (lunghezza standard), angolo di deviata 24°, raggio di curvatura 194,6 mm (corrisponde R1), con sezione di compensazione 22232 estendibile a 30°. - senza massicciata - codice 80 - Scala N 1/160
Right turnout with electric drive.
Length 104.2 mm (standard length), deflection angle 24°, bending radius 194.6 mm (corresponds to R1), with compensation section 22232 extendable to 30°. - without ballast - code 80 - Scale N 1/160
Rechte Weiche mit Elektroantrieb.
Länge 104,2 mm (Standardlänge), Umlenkwinkel 24°, Biegeradius 194,6 mm (entspricht R1), mit Ausgleichsstück 22232 auf 30° verlängerbar. - ohne Ballast - Code 80 - Maßstab N 1/160