PECO ST-244 Scala HO Codice 100 Setrack: Scambio in curva destro angolo: 11.25 °
Codice 100 Setrack: Scambio in curva destro - angolo: 11.25 °, profilo del binario di 2,5 mm - senza massicciata (attenzione: il cuore dello scambio non é conduttivo/polarizzato)
Code 100 Setrack: Switch on right bend - angle: 11.25 °, track profile of 2.5 mm - without ballast (attention: the heart of the switch is not conductive / polarized)
Code 100 Setrack: Weiche in Rechtskurve - Winkel: 11,25°, Gleisprofil von 2,5 mm - ohne Schotter (Achtung: das Herzstück der Weiche ist nicht leitend / polarisiert)
Codice 100 Setrack: Binario curvo R2 (raggio mm. 438) - compensazione per scambi art. ST-240/ST-241
- senza massicciata
Altezza del profilo 2,5 mm
Per fare un cerchio servono 16 pezzi
Code 100 Setrack: Curved track R2 (radius mm. 438) - compensation for switches art. ST-240/ST-241
- without ballast
Profile height 2.5 mm
To make a circle you need 16 pieces
Code 100 Setrack: Bogengleis R2 (Radius mm. 438) - Ausgleich für Weichen Art.-Nr. ST-240/ST-241
- ohne Vorschaltgerät
Profilhöhe 2,5 mm
Um einen Kreis zu machen, benötigen Sie 16 Teile
Codice 100 Setrack: Scambio manuale destro 22.5° - raggio 438 mm, Lunghezza 167 mm, profilo del binario di 2,5 mm - senza massicciata (attenzione: il cuore dello scambio non é conduttivo/polarizzato)
Code 100 Setrack: Right hand switch 22.5 ° - radius 438 mm, Length 167 mm, track profile of 2.5 mm - without ballast (attention: the heart of the switch is not conductive / polarized)
Code 100 Setrack: Rechte Weiche 22,5° - Radius 438 mm, Länge 167 mm, Gleisprofil 2,5 mm - ohne Schotter (Achtung: das Herz der Weiche ist nicht leitend / polarisiert)
Codice 100 Setrack: Scambio manuale sinistro 22.5° - raggio 438 mm, Lunghezza 167 mm, profilo del binario di 2,5 mm - senza massicciata (attenzione: il cuore dello scambio non é conduttivo/polarizzato)
Code 100 Setrack: Left hand switch 22.5 ° - radius 438 mm, Length 167 mm, track profile 2.5 mm - without ballast (attention: the heart of the switch is not conductive / polarized)
Code 100 Setrack: Linke Weiche 22,5° - Radius 438 mm, Länge 167 mm, Gleisprofil 2,5 mm - ohne Schotter (Achtung: das Herzstück der Weiche ist nicht leitend / polarisiert)
Codice 100 Setrack: Scambio in curva sinistro - angolo: 11.25 °, profilo del binario di 2,5 mm - senza massicciata (attenzione: il cuore dello scambio non é conduttivo/polarizzato)
Code 100 Setrack: Switch on left bend - angle: 11.25 °, track profile of 2.5 mm - without ballast (attention: the heart of the switch is not conductive / polarized)
Code 100 Setrack: Weiche auf Linkskurve - Winkel: 11,25°, Gleisprofil von 2,5 mm - ohne Schotter (Achtung: das Herzstück der Weiche ist nicht leitend / polarisiert)
Dispositivo sganciatore manuale (adatto per binario art. ST-201) - compatibile con la gamma Code 100 PECO Streamline.
Può essere montato su rotaie per sganciare il materiale rotabile che utilizza un gancio di blocco della tensione.
Manual release device (suitable for track art. ST-201) - compatible with the Code 100 PECO Streamline range.
Can be mounted on rails to release rolling stock using a tension lock hook.
Manuelle Entriegelungsvorrichtung (passend für Gleis Art. ST-201) - kompatibel mit der Code 100 PECO Streamline-Reihe.
Kann auf Schienen montiert werden, um Rollmaterial mit einem Spannverschlusshaken zu lösen.
Morsetto prendi corrente bipolare per alimentazione binari. Basta collegare i fili dall'uscita del controller e collegare le clip alle guide opposte.
Adatti per tutti i tipi di binario scala HO 1:87 codice 100 (Peco e Hornby)
Bipolar current take-off terminal for track power supply. Simply connect the wires from the controller output and attach the clips to opposite rails.
Suitable for all types of track HO 1:87 code 100 (Peco and Hornby)
Bipolare Stromabnahmeklemme für Gleisstromversorgung. Schließen Sie einfach die Drähte vom Controller-Ausgang an und befestigen Sie die Clips an gegenüberliegenden Schienen.
Passend für alle Gleistypen HO 1:87 Code 100 (Peco und Hornby)
Motore elettrico sotto plancia per scambi (con asta corta) - adatto per tutte le tipologie di binario PECO scala HO 1:87 e scala N 1:160
Trasmissione doppia bobina (2 - 2,4 A).
Dopo l'attacco all'interruttore, l'azionamento può essere inserito dall'alto attraverso un grande foro (circa 40 x 24 mm) nella piastra di base.
Montaggio 1: in combinazione con la piastra di montaggio art. PL-9
Montaggio 2: a pavimento con molteplici opzioni di regolazione.
Electric motor under the dashboard for switches (with short rod) - suitable for all types of PECO rails, HO scale 1:87 and N scale 1: 160
Double coil transmission (2 - 2.4 A).
After attachment to the switch, the drive can be inserted from above through a large hole (approx.40 x 24 mm) in the base
Motore elettrico laterale per azionamento scambi - adatto per tutte le tipologie di binario PECO scala HO 1:87 e scala N 1:160
Si aggancia direttamente a uno scambio Peco sia per la mano sinistra che per quella destra. Nessun foro da praticare ed è precablato
Lateral electric motor for switch actuation - suitable for all types of PECO tracks, HO 1:87 scale and N scale 1: 160
Attaches directly to a Peco switch for both left and right hand. No holes to drill and it is pre-wired
Seitlicher Elektromotor zur Weichenbetätigung - passend für alle Arten von PECO Gleisen, Spur HO 1:87 und Spur N 1:160
Wird direkt an einen Peco-Schalter für linke und rechte Hand angeschlossen. Keine Löcher zu bohren und es ist vorverdrahtet
Motore elettrico universale TwistLock
Motore universale di nuova generazione adatto per tutte le tipologie di binario PECO scala HO 1:87 e scala N 1:160.
Dimensioni
Lunghezza = 42 mm
Gancio a gancio = 42 mm
Profondità = 25 mm
Perno di prolunga = 72 mm
TwistLock universal electric motor
New generation universal motor suitable for all types of PECO tracks in HO 1:87 scale and N scale 1: 160.
Dimensions
Length = 42 mm
Hook hook = 42 mm
Depth = 25 mm
Extension pin = 72 mm
Universal-Elektromotor TwistLock
Universalmotor der neuen Generation, geeignet für alle PECO-Gleistypen im Maßstab HO 1:87 und im Maßstab N 1:160.
Maße
Länge = 42 mm
Hakenhaken = 42 mm
Tiefe = 25 mm<
21,30 €19,75 €
Chi ha acquistato questo articolo ha comprato anche:
Codice 100 Streamline Insulfrog: Scambio inglese semplice 12° con traversine in legno - lunghezza 249 mm - Angolo: 12° - altezza 2,5 mm
raggio nominale 610 mm (il cuore dello scambio non è conduttivo/polarizzato) - scala HO 1:87
Code 100 Streamline Insulfrog: Simple English switch 12 ° with wooden sleepers - length 249 mm - Angle: 12 ° - height 2.5 mm
nominal radius 610 mm (the heart of the exchange is not conductive / polarized) - HO scale 1:87
Code 100 Streamline Insulfrog: Einfache englische Weiche 12° mit Holzschwellen - Länge 249 mm - Winkel: 12° - Höhe 2,5 mm
Nennradius 610 mm (das Herz der Börse ist nicht leitfähig / polarisiert) - HO-Maßstab 1:87
Codice 100 Streamline Electrofrog: Scambio corto destro 12° - lunghezza 185 mm
ATTENZIONE: scambio electrofrog - polarizzato con cuore in metallo.
Piccolo raggio: 610 mm
Angolo pezzo centrale: 12 °
Lunghezza: 185 mm
Code 100 Streamline Electrofrog: short right turn 12° - length 185 mm
ATTENTION: electrofrog exchange - polarized with metal heart.
Small radius: 610mm
Center piece angle: 12°
Length: 185mm
Code 100 Streamline Electrofrog: kurze Rechtskurve 12° - Länge 185 mm
ACHTUNG: Elektrofroschtausch - polarisiert mit Metallherz.
Kleiner Radius: 610 mm
Mittelstückwinkel: 12°
Länge: 185 mm
Ultimi articoli in magazzino
25,60 €23,23 €
Codice 100 Setrack: Scambio in curva destro - angolo: 11.25 °, profilo del binario di 2,5 mm - senza massicciata (attenzione: il cuore dello scambio non é conduttivo/polarizzato)
Code 100 Setrack: Switch on right bend - angle: 11.25 °, track profile of 2.5 mm - without ballast (attention: the heart of the switch is not conductive / polarized)
Code 100 Setrack: Weiche in Rechtskurve - Winkel: 11,25°, Gleisprofil von 2,5 mm - ohne Schotter (Achtung: das Herzstück der Weiche ist nicht leitend / polarisiert)